Skip to content
English
  • There are no suggestions because the search field is empty.

Configure a Digi-Star GT 560 Grain Cart Scale for Autolog 

Configure a Digi-Star 560 grain cart scale to properly use Autolog and send information via Bluetooth to the Conservis Row Crop App.

What’s Needed:  

  • A Digi-Star GT 560 grain cart scale installed, tested and working
  • A compatible Android or iOS device
  • Conservis Bluetooth adapter set for 8/N/1 communication
  • A pen or pencil

Procedure:

Note: Please write original values on blank line in each of the steps.

Configure the Grain Cart Scale

  1. Connect the Conservis Bluetooth adapter to the bottom of the scale-indicator (Serial/COM1-2). 
  2. Power on the scale.
  3. Enter 2101 and press SELECT to enter the settings for SCOREM ______________
    1. Use the up arrow to scroll through the selections until you reach 0.   This setting will make sure the scale is not in Broadcast mode. Press ENTER to save the setting.
  4. Enter 5005 and press SELECT to enter the settings for PRPORT _____________
    1. Use the up arrow to scroll through the selections until you reach COM 1.  Press ENTER to save the setting.  
  5. Enter 2202 and press SELECT to enter the settings for COM 1 PARITY._____________
    1. Use the up arrow to scroll through the selections until you reach NONE.  Press ENTER to save the setting.
  6. Enter 2203 and press SELECT to enter the settings for COM 1 DATA BITS._____________
    1. Use the up arrow to scroll through the selections until you reach 8.  Press ENTER to save the setting.
  7. Enter 1203 and press SELECT to enter the settings for DATE F. _____________
    1. Use the up arrow to scroll through the selections until you reach 2.  Press ENTER to save the setting.
  8. Enter 6401 and press SELECT to enter the settings for RSSCTL. _____________
    1. Use the up arrow to scroll through the selections until you reach RPM.  Press ENTER to save the setting.
  9. Enter 8719 and press SELECT to enter the settings for SYSDTF. _____________
    1. Use the up arrow to scroll through the selections until you reach YES.  Press ENTER to save the setting.
  10. Power off the scale, wait 5 seconds and then power it back on.  The scale should now be prepared to have the Mobile Device paired to the Bluetooth adapter and the Conservis Row Crops application configured.