Skip to content
English
  • There are no suggestions because the search field is empty.

How to Check the Firmware Version on Digi-Star EZ 400

Check the firmware version on your scale in order to use bluetooth to transmit weights from your Digistar or Unverferth Scale to the Conservis Harvest App

Digi-Star EZ400:  



Verifying Firmware Version - Performing a Self Test:

TIP: It is often easier to use your phone to record a video of the scale screen when following these steps, rather than trying to read off the firmware version quickly.

  1. Start with the scale powered on and showing the live weight.
  2. Press the NET/GROSS button briefly
  3. Then press the ON/OFF button to start the Self Test
  4. The scale will then cycle through some informational screens before starting a self test. While watching the display, look for PRG ID and then the next screen will have the firmware information for the scale.
  5. The firmware version will be something like: EZ2 7.D or 512 8.P (basically EZ2 and then number.letter or 512 and then number.letter)

For each scale you have of this model, please record the firmware and the serial number on the back of the scale:

Serial Number Firmware Broadcast or Autolog